The first module on every IP Fire^TM network is a display module that is designated as the Virtual Panel Module (VPM). Network configuration and management are initially performed through the VPM. Its terminal interface display acts as a gateway to the other modules installed in the network and can interact with any device configured on those modules.

A single VPM can interact with up to 50 distributed modules of any type in any configuration. As modules are attached to the network, they obtain their IP address assignments from the VPM managing the modules on the fire control network. All modules are connected via an RTR-1, RTR-2, RTR-3 or equivalent hub, or directly (by use of a cross-over cable) to the VPM.

Once connected, SDM’s provide identical features/functions as the VPM. SDM’s may be installed in any number up to the system maximum of 50 modules.

VPM/SDM modules feature a ¼ VGA graphical user interface, programmable soft keys, system event annunciation, acknowledge, signal silence, and reset switches along with separate switches for sorting history logs. Drill and lamp test are also accessible from any VPM/SDM.

VPM/SDM modules feature two integral USB 2.0, Type A ports for easy system access. The USB ports can be utilized to program/back-up/restore any or all IPF Series modules located anywhere on the network to/from any standard USB Mass Storage Device.

See the full Data Sheet